Seaward Test n Tag Printer User Manual

Test ‘n' Tag Label Printing System Instruction Manual Bracken Hill, South West Industrial Estate, Peterlee, Co. Durham SR8 2SW. Englan

9 4. Printing Labels ( PrimeTest / Rigel ) Note This section should be read with reference to the tester's Instruction Manual The Test’n’Tag p

10 If your printer is not already in the “New” list then you need to search for it now by pressing Search (F1). Note: If the required Test’n’Ta

11 Highlight Test’n’Tag and press Select (F4) Press OK (F4) to return to the previous screen. Note: Not all the printer types show above will be

12 Note: The maximum number of characters that can be displayed in a Test ‘n’ Tag barcode is 12. If this limit is exceeded, the barcode will not

13 The logo must be monochrome in .BMP format with a maximum size of 320 pixels by 240 pixels. Press Menu (F4), select Data Transfer using

14 The file will be transferred to the tester. On the tester screen you will see the amount of data received ( shown on the top left of the disp

15 5. Printing Labels ( Supernova / Europa ) Note This section should be read with reference to the tester’s Instruction Manual Labels can be prin

16 Set the TnT PRINTER configuration to “K3110” With the Printer powered on (Green Light illuminated) through its AC Adaptor, connect the Printer

17 Complete the rest of ENTER APPLIANCE DETAILS as normal (refer to your Tester Manual) and move on to the next stage in the test process. Note for

18 A failed test will be displayed as follows: If you highlight CHANGE LABEL FORMAT and press the Enter key, then a variety of differen

Test `n' Tag Label Printing System Instruction Manual 308A550 April 2009 © 2008 Seaward Electronic Ltd. Issue 6

19 After the label is printed press the on-board cutter at the front of printer (where the label appears). To remove the backing from the label use

20 Use the cursor keys to select CONFIGURE to display the following: If the options are not set on entering this screen, use the cursor keys t

21 Changing the label title The label title can be changed so that the default title, SEAWARD TEST ‘N’ TAG LABEL is replaced with your own text. Not

22 Use the cursor keys to select EDIT PASS / FAIL LABEL TITLE. Then press the ENTER key to display the following screen: Enter your own text then p

23 Adding a logo to the label To add a logo to the labels it is necessary to transfer a logo from the PC into the tester. Note The tester is only ab

24 Label Title The program is set to use the default label title in the tester. This can also be changed at the tester (see Changing the Label Title

25 Test `N’ Tag Logo The program allows you to select a logo to transfer to the tester. Three example logos are supplied with the program. Any one o

26 Transfer To send the Logo and/or Label Title to the tester ensure the correct Com Port is set then press the Transfer… button. Put the tester in

27 6. Trouble Shooting A lot of print quality problems can be resolved by ensuring the cartridge has been tensioned prior to installation in the pr

28 5) Replace interface cable if possible 6) Fault persists – contact Seaward Technical Support. Tester Printer Error Message ‘Incorrect Printer

2 Limited Warranty & Limitation of Liability SEAWARD Electronic Limited guarantees this product for a period of 1 year. The period of warranty w

29 Print has lines running across 1)Remove cartridge and gently wipe head with alcohol wipes or clean cloth. Re-install cartridge. 2) Try another

30 7. Parts List Item Part Number Printer & Power Supply 308A961 Power Supply 308A963 Printer Lead (Supernova / Europa) 308A950 This Instruc

3 Disposal of Old Product This product has been designed and manufactured with high quality materials and components that can be recycled

4 Table of Contents Before Starting... 5 1. Introduction ...

5 Before Starting 1. Check that all the component parts are present: - • Portable Printer • AC Adaptor • Printer Lead • Supply Cartridge •

6 1. Introduction Test 'N' Tag is the label printing system exclusive to the Seaward Group. It enables users of Seaward and Rig

7 2. Installing the Supply Cartridge 1. Lift the unit's dust cover. 2. Make sure the locking spindle is in the counter-clockwise (unlocked)

8 3. Printing a Test Label Connect the supplied AC adapter to the back of the Printer. Connect the AC Adapter to the power outlet. Note Each of the